How To Craft A Smock

How to Craft a Smock

Smocks are fun; rather making the bodice of a porcelain dress is an adventure that leads to joy. To get started however you will need to consider design.

How to choose design your smock:
In the first row, you will need to knit stitch your design into the 799 DMC. The stitching process is the cable stitches, which you knit to produce patterns that resemble twisted ropes.

The second one and a quarter line requires the baby waves stitched over another ½ line followed by another 1 ¾ baby waves over another ½ line, which should form the shape of a diamond with an additional line at 1 ¼. The following line should be two ½-baby waves over another ½ line and continue to the next line at three ¼-baby waves moving to the other side at ½ line into another diamond shape and a line at 2 3/4. Finish with a 4-line cable stitch.

Next, you will collect the top of your dress to the seams of the shoulder at the back and front yokes and complete the seams by crisscross stitching and pressing the bodice at the back and on the folded line. If you want easy attachment of your pattern to the collar, you will need to trim the piping. Next, begin sewing your piping to the other side of the collars and a the untreated edges.

TIP: Use greaseproof paper and place it beneath the collars to continue stitching with ease.

Once the piping and the collars are collected at the area of your facing collar, attach side by side to the right and use stitch pips to finish the following lines. Next, cut the seams and then trim around the collars. Press after you turn your seams to the right. You want to mark the front center yoke and make a line, marking it so that it aligns with the back of your bodice. Pin your collars so that it is placed with the neck and join with the front center. Once you place your area, begin sewing about the garment’s edge and around the neck toward the center of the back whilst leaving the facing liberal.

Continue:
Bring the facing on to the other side and join it so that it collects with the seams of the shoulders and the front center. Now stitch about the garment’s edge and around the neck the same as you did on the prior stitch. Cut, and press after you turn your garment on the right angle. Now, stitch pip so as to, cross the right region and the yoke at the front on your seam lines. The facing should be liberal. The front smock area is now ready for you to complete.

To complete the smock you will need materials. You will need 28 inches of light tone and plain-woven soft, smooth fabric made up of linen or cotton. You will need to choose a small pip, a few long, narrow buttons, size 50 cotton thread broder, embroidery thread, and so on. Once you have your materials make your pattern and cut two frontal yokes, dual fold yokes for the back, sleeves, bands, collars, (4) rear waistline, band for leg, and 1 front and back segment for pant fold. Next, use starch and spray your fabric. To attach your pips use the zipper or pip foot.

You will need to finish your smock starting with your plate, front smock section and fitting the yoke at the front. Once the yoke is fitted you can join yokes and keep the pips near the first row, you will need to knit stitch your design into the 799 DMC at this time and finish your design.

 

 
Translate Page Into German Translate Page Into French Translate Page Into Italian Translate Page Into Portuguese Translate Page Into Spanish Translate Page Into Japanese Translate Page Into Korean

More Articles

 

 

Search This Site

 

Related Products And FREE Videos





More Articles


Choosing Batting Quilt Fibers For Craft

... relax and inflate. You want to space your batting closely to avoid bunching also when crafting your quilt. Some materials require pre-washes before you can use the fabric. Read your labels. You have options in battings, including the traditional, which is often made of cotton and the polyesters. The blends ... 

Read Full Article  


How To Craft Quilts With Freezer Paper

... using glue sticks. Ultimately, you can sew by hand to form the appliqu . In addition, you can use your machine to create a pattern of appliqu . It s your choice. To use the glue stick method, you perform the same actions, as you would in the freezer paper, only you use copier paper. You can use paper ... 

Read Full Article  


How To Craft A Bonnet

... fabric (white), such as the batiste. You will need a couple of edge laces, say around 2 yards and inches of lace edge. Gather 36 inches of smooth craft wire. You will need 28 inches of dual side rayon fabric, such as satin ribbons and a set of wire cutters, and pliers with a long muzzle. Once you gather ... 

Read Full Article  


How To Craft The Pieced Wall Hangers

... inches of pieces of fabric that coordinate. This will make up your background. Purchase another traditional-weight piece of batting in the same dimension as the background material. Add 4 yards of coordinated quilt binding fabric, and gather all-purpose thread to complete your task. Throughout the process, ... 

Read Full Article  


How To Craft Chimes

... 7/8 inch grommet screw. How to make chimes: Now you are ready to make your chimes. On the wooden plates, add a coat of varnish, allow drying, and continuing a few times adding the varnish as needed. Use your grommet 5/8 screw, and screw it in by hand, screwing it into the plate. If you add, additional ... 

Read Full Article